Annealing Ovens
The annealing process uses heat to decrease strength and increase ductility. Annealing Ovens are typically used to anneal both metal and plastic products. INFRATROL Annealing and Tempering Ovens are designed and built to your specific requirements for part size, production rate and thermal characteristics. Below is just a sampling of some of the Annealing and Tempering Ovens we have built.
Gas
Fired Plastic Vertical Annealing Oven / Gimbled Ovens
Gas fired oven to anneal plastic automotive parts. Parts are loaded/unloaded from an indexing gimbaled slat conveyor. Large rear access doors are provided for easy access into the oven for maintenance.
Reference # 7070
Steam
Heated, 3 Cavity Conveyorized Batch
Indexing Oven
Steam heated, three cavity batch oven used to anneal and shrink plastic strips used on automobiles. Strips are mounted on large work racks which are transported in and out of the oven on three sets of chain conveyors. Oen cavities have air operated door and with automatic loading and unloading from each oven cavity.
Reference # 6208
Gas
Fired Tempering Oven
Gas fired oven used to temper steel parts. Oven uses heavy-duty belt conveyor with side plates and incorporates air seals to minimize air spillage from end openings. The oven was completely operational before shipment and was shipped as one complete unit for ease of installation.
Reference # 7388
To request more details,
click here.